Forum

craouette · Posted: Sat Apr 29, 2006 5:11 pm Post subject: daemon, from angry_panda

submitted by angry_panda:

angry_panda · Joined: 26 Apr 2006 Posts: 12 Location: Adelaide, Australia

Im workin on a body, but its taking longer than expected because my computer cant handle the file...I need more ram.
The body is coming allong quite well.

craouette · Posted: Mon May 01, 2006 7:14 am Post subject:

try to work on a less subdivided version, clear the history to save ram.
can we see a wire ?

pierre

angry_panda · Joined: 26 Apr 2006 Posts: 12 Location: Adelaide, Australia

I made the body and it looked quite good... then i put it with the head and they just didnt work together, i'll have to make a new head to match the body an a body to match the head... if i get round to it. That was just an experiment.

angry_panda · Joined: 26 Apr 2006 Posts: 12 Location: Adelaide, Australia

By the way does anyone know a good way of making wings, as in thin leathery bat/dragon type wings. thanks

craouette · Posted: Sat May 13, 2006 7:22 am Post subject:

post (or send me) pictures of the body... so that we can judge by ourselves.

craouette

craouette · Posted: Mon May 15, 2006 7:40 am Post subject:

Here are the pictures:

I have a question: What tool are you using ? the mesh seems very dense ? Are you using the sculpting tool ?

craouette

angry_panda · Joined: 26 Apr 2006 Posts: 12 Location: Adelaide, Australia

No, im not using the sculpting tool much, i used it a bit, but i was mostly selecting verticies and moving, rotating etc. Im fairly new to the program, so im kinda learning as i go.

craouette · Posted: Mon May 15, 2006 11:49 am Post subject:

but you are posting wire of sub-divided meshes then, no ?

angry_panda · Joined: 26 Apr 2006 Posts: 12 Location: Adelaide, Australia

sorry, i'm not quite sure i understand your question, I used SDS.

craouette · Posted: Fri May 19, 2006 12:45 pm Post subject:

here is the latest version of the body made by angry_panda:

no bad. continue with a beasty head....
craouette

angry_panda · Joined: 26 Apr 2006 Posts: 12 Location: Adelaide, Australia

I dont know what knid of head to go for, the old one definately doesnt work.
Anyone got any ideas?

craouette · Posted: Sat May 20, 2006 12:31 pm Post subject:

angry_panda: "Here is the final, full model - with a head. I did the head in about
20minutes...so its a bit dodgy and has no fangs/teeth."

cody18 · Joined: 20 Apr 2011 Posts: 4

Hi!

ahm...the head is good but it is not comfortable to the body so try to create another one and also include a neck....

good luck! Wink

_________________
infiniti, evolution, and executive electronic cigarette are available at Technic